EPOFORM 100 construction adhesive and coating for verticals 1000 + 500 g

ADVANTAGES

Long open time

High hardness and toughness

Possibility of pigmenting with dry

pigments VIVAT,EFFECT and SIRIUS luminous pigments

Possibility of later processing

Adjustments of hardness and weight with fillers: filler K-5, Mikrosil, Talc, Heavy filler

PROPERTIES

Mixing ratio: 100:50 weight

Open time (150 g, 20°C): 30-60 minutes

Curing: 24 hours

APPLICATION

Components A and B are weighed in a ratio of 100:50 (weight parts). Mix thoroughly. If possible, transfer the mixture to another container and mix again. Apply the mixture to the surface of foam, wood, etc., and smooth with a spatula or brush if necessary.

If we want to reduce the density of the material or increase the volume, we can add a filler MIKROSIL (usually 1-10%);

to increase hardness, we can add FILLER K-5 or QUARTZ FLOUR (20-80%).

For easier sanding, add TALC (10-50%).

Color the mass with dry pigments VIVAT, EFFECT or SIRIUS.

Clean tools with Epoxy cleaner, acetone or similar solvents.