PROTEKTIN impregnating agent for stone, concrete 1l
is a colorless impregnating agent and coating based on special UV stable, alkali resistant acrylic resins, additives, and organic solvents.
It is used for the impregnation and coating of colored and uncolored cement products, pavings, cement floor coverings, natural and artificial stone, gypsum, etc.
ADVANTAGES
• seals, protects, and surface hardens
• reduces dusting
• does not yellow
• resistant to low temperatures, UV, and moisture
CONSUMPTION
One liter is sufficient for 6 – 10 m² with a single application. Consumption depends on the method of application, porosity of the surface, and weather conditions.
APPLICATION METHOD
• spraying with an air or airless gun
• with a brush
• with a roller
WORKING CONDITIONS
• the coating must be applied to a clean and dry surface
• at a temperature between 5 and 25 °C
• the coating is dust dry after 2-4 hours, the next layer can be applied after 4-8 hours, depending on weather conditions
• the coating is FLAMMABLE, vapors with air can form explosive mixtures, so appropriate safety regulations must be observed during work.
DANGEROUS
H225 Flammable liquid and vapour.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read the label before use.
P241 Use [electrical equipment/ventilation equipment/lighting equipment/…] that is explosion-proof.
P303 + P361 + P353 IN CASE OF CONTACT WITH SKIN (or hair): Immediately remove all contaminated clothing. Rinse skin with water [or shower].
P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P405 Keep locked up.
P501 Dispose of contents/container in accordance with regulations.
